分享程序员开发的那些事...
更新时间：2022-10-01 23:38:40
CentOS Linux解决Device eth0 does not seem to be present
一，问题描述
在VMware里克隆出来的CentOS Linux。。
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象：
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
二，解决办法
1；
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
|
首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules# program, run by the persistent-net-generator.rules rules file.## You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下，eth1网卡的mac地址00:0c:29:50:bd:17
接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0# vi /etc/sysconfig/network-scripts/ifcfg-eth0将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后，重启网络# service network restart或者# /etc/init.d/network restart正常了。 |
2；
|
1
|
、删除/etc/udev/rules.d/70-persistent-net.rules文件，重启系统
|
3；
|
1
2
3
|
、如果上面的不起作用 (1), ifconfig 查看HWADDR的值
(2), /etc/sysconfig/network-script/ifcfg-eth1中修改ifconfig中查出的HWADD
|
本文转自陈仲阳0 51CTO博客，原文链接:http://blog.51cto.com/wolfword/1304000
Linux 克隆虚拟机引起的“Device eth0 does not seem to be present, delaying initialization”
Linux 克隆虚拟机引起的“Device eth0 does not seem to be present, delaying initialization”
Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization
Device eth0 does not seem to be present, delaying initialization（vmware 拷贝引起）
