感谢@tripleee和@Jarmund您的建议。从你输入我终于能找出我的问题的解决方案。我从关联数组暗示，使每个块的唯一键，所以这里是我做的。

Thanks @tripleee and @Jarmund for your suggestions. From your inputs I was finally able to figure out solution of my problem. I got hint from associative arrays to make unique key for each block, so here is what i did

• 取文件-2，每个块转换成单行

• take file-2 and convert each block into single line

的awk'/[Ss]etup.[Tt]est/ || / perl的/ [[：字母：]] 的/ [SS] etup [RR] EQ / {如果（B）退出;否则B = 1} 1'文件2> $ TESTSETFILE
猫$ TESTSETFILE | SED'：一个; N; $ BA; S / \\ n //克; S / // G'>> $ SINGLELINEFILE

awk '/[Ss]etup.[Tt]est/ || /perl/[[:alpha:]]/[Ss]etup[Rr]eq/{if(b) exit; else b=1}1' file-2 > $TESTSETFILE cat $TESTSETFILE | sed ':a;N;$!ba;s/\n//g;s/ //g' >> $SINGLELINEFILE

现在在这个文件中的每一行是唯一的入口

Now each line in this file is a unique entry

这也许解决方案是不是***的，但它是很多比previous的速度更快。

Maybe this solution is not best but it is lot faster than the previous one.

下面是我的新剧本

FLBATCHLIST=$1
BATCHFILE=$2

TEMPDIR="./tempBatchdir"
rm -rf $TEMPDIR/*
WORKFILE="$TEMPDIR/failedTestList.txt"
CPBATCHFILE="$TEMPDIR/orig.test"
TESTSETFILE="$TEMPDIR/testset.txt"
DIFFFILE="$TEMPDIR/diff.txt"
SINGLELINEFILE="$TEMPDIR/singleline.txt"
TEMPFILE="$TEMPDIR/temp.txt"
#Output
FAILEDBATCH="$TEMPDIR/FailedBatch.test"
LOGFILE="$TEMPDIR/log.txt"

convertSingleLine ()
{
sed -i 's/^[[:space:]]*//;s/[[:space:]]*$//g;/^$/d' $CPBATCHFILE
STATUS=1
while [ $STATUS -ne "0" ]
do
        if [ ! -s $CPBATCHFILE ]; then
                echo "$CPBATCHFILE is empty" >> $LOGFILE
                STATUS=0
        fi
        awk '/[Ss]etup.*[Tt]est/ || /perl\/[[:alpha:]]*\/[Ss]etup[Rr]eq/{if(b) exit; else b=1}1' $CPBATCHFILE > $TESTSETFILE
        cat $TESTSETFILE | sed ':a;N;$!ba;s/\n//g;s/ //g' >> $SINGLELINEFILE
        echo "**" >> $SINGLELINEFILE
        TSTFLLINES=`wc -l < $TESTSETFILE`
        CPBTCHLINES=`wc -l < $CPBATCHFILE`
        DIFF=`expr $CPBTCHLINES - $TSTFLLINES`
        tail -n $DIFF $CPBATCHFILE > $DIFFFILE
        mv $DIFFFILE $CPBATCHFILE
done
}

####STARTS HERE####
mkdir -p $TEMPDIR

sed 's/^[eE][xX][eE][cC]//g;s/^[[:space:]]*//;s/[[:space:]]*$//g;/^$/d' $FLBATCHLIST > $WORKFILE
sed -i 's/\([\/\.\"]\)/\\\1/g' $WORKFILE

cp $BATCHFILE $CPBATCHFILE
convertSingleLine

for fltest in $(cat $WORKFILE)
do
        echo $fltest >> $LOGFILE
        grep "$fltest" $SINGLELINEFILE >> $FAILEDBATCH
        if [ $? -eq "0" ]; then
                echo "TEST FOUND" >> $LOGFILE
        else
                ABSTEST=$(echo $fltest | sed 's/\\//g')
                echo "FATAL ERROR: Test \"$ABSTEST\" not found in $BATCHFILE" | tee -a $LOGFILE
        fi
done

awk '!x[$0]++' $FAILEDBATCH > $TEMPFILE
mv $TEMPFILE $FAILEDBATCH

sed -i "s/exec/\\nexec /g;s/#/\\n#/g" $FAILEDBATCH
sed -i '1d;s/\//\\/g' $FAILEDBATCH

下面是输出

$ crflbatch file-1 file-2
FATAL ERROR: Test "perl/RRP/RRP-1.30/JEDI/CommonReq/confAbvExp" not found in file-2
FATAL ERROR: Test "this/or/that" not found in file-2

$ cat tempBatchdir/FailedBatch.test
exec 1.20\setup\testinit
exec 1.20\abc\this_is_test_1
exec 1.20\abc\this_is_test_1

exec perl\RRP\SetupReq\testdef_ijk
exec perl\RRP\RRP-1.30\JEDI\SetupReq\confAbvExp
exec perl\RRP\RRP-1.30\JEDI\JEDIExportSuccess2

exec perl\LRP\SetupReq\testird_LRP("LRP")
exec perl\BaseLibs\launch_client("LRP")
exec perl\LRP\LRP-classic-4.14\churrip\chorSingle
exec perl\LRP\BaseLibs\setupLRPMMMTab
exec perl\LRP\BaseLibs\launchMMM
exec perl\LRP\BaseLibs\launchLRPCHURRTA("TYRE")
#PAUSEExpandChurriptreeview&openallnodes
exec perl\LRP\LRP-classic-4.14\Corrugator\multipleSeriesWeb
exec perl\BaseLibs\ShutApp("SelfDestructionSystem")
exec perl\LRP\BaseLibs\close-MMM
$