可能是我要写的重申在引用的@walid的帖子中，但是通过快速浏览它，我没有看到它...

It might be that what I'm about to write reiterates something in the post @walid referenced, but by just quickly glancing at it I didn't see it...

首先，当使用MSSQL时，您需要 pdo_sqlsrv驱动程序。只需将您需要的版本（PHP 5.3 / 5.4 nts / ts）复制到PHP的 ext / 文件夹中，将扩展名添加到您的php.ini中，然后重新启动apache。存档包含 pdo_sqlsrv * .dll 和 sqlsrv * .dll ，因此请确保使用 pdo_ * 强>！如果扩展程序成功加载，您可以通过 phpinfo（）进行检查。

First of all, when using MSSQL you need the pdo_sqlsrv driver. Just copy the version you need (PHP 5.3/5.4 nts/ts) into your PHP's ext/ folder, add the extension to your php.ini and then restart apache. The archive contains both pdo_sqlsrv*.dll and sqlsrv*.dll, so make sure you use pdo_*! You can check via phpinfo() if the extension was loaded successfully.

您的parameters.ini将保持几乎相同，除了database_driver，显然应该设置为 pdo_sqlsrv 。没有必要在parameters.ini中指定一个端口，但是如果你想要的话，MSSQL的默认端口是1433。

Your parameters.ini will stay pretty much the same, except for the database_driver, which obviously should be set to pdo_sqlsrv. It should not be necessary to specify a port in the parameters.ini but in case you want to, MSSQL's default port is 1433.

只是一个例子，你的参数。 ini应该看起来像这样：

Just as an example, your parameters.ini should look something like this:

database_driver =   pdo_sqlsrv
database_host =     127.0.0.1
database_port =     1433
database_name =     Northwind
database_user =     DatabaseUser
database_password = DatabaseUserPassword

作为旁注，我只使用yaml-config，所以这可能不是100％正确！

As a sidenote, I only use the yaml-config, so this might not be 100% correct!