我建议您确保完全遵循以下步骤:

1. 首先请确保已将消息传递终结点配置为 https URL，因为它不支持http.
2. 检查您指定的消息传递端点，并确保它是 与您在漫游器仿真器中使用的相同.查看屏幕截图.

1. First of all make sure you have configured the messaging endpoint as an https URL as it does not supports http.
2. Check Your Messaging endpoint that you specified and make sure it is same as your using in the bot emulator. See the screen shot.

1. 在您的bot azure门户上，转到Channel菜单，并确保有 没有问题.请参见下面的屏幕截图:

1. On your bot azure portal go to Channel menu and make sure there is no issues. see the screen shot below:

在App Service Settings下的
1. Azure门户Configuration 是MicrosoftAppId和MicrosoftAppPassword请勿更改这些 下载后.见下图

1. Azure portal Configuration under App Service Settings there will be MicrosoftAppId and MicrosoftAppPassword do not change these after downloading it. See the below image

注意:我还建议您这里.对于远程调试，请 看看此处 .要发布您的本地项目，您可以参考

Note: I also suggest you to create a new project on portal and test it on there whether it is working exactly then download it for your enhancement. you could refer here. For remote debug please take a look here. To publish your local project you could refer this

如果您仍有任何疑问，请随时发表评论.谢谢，祝您编程愉快！

If you still have any concern feel free share in comment. Thank you and happy coding!