命令格式

SC命令的格式：SC [Servername] command Servicename [Optionname= Optionvalues

*服务名是服务本身的名称而非显示名，

*＝号后面要加一个空格，然后才能写选项名

SC命令共24个子命令，如下所示

sc boot　sc config　sc continue　sc control　sc create　sc delete　sc descrīption　

sc enumdepend　　sc failure　sc getdisplayname　sc getkeyname　sc interrogate　

sc lock　sc pause　sc qc　　sc qdescrīption　sc qfailure　sc query　sc queryex　

sc querylock　sc sdset sc sdshow　　sc　start　sc stop

比较常用的，禁止或开启服务

sc config tlntsvr start= auto     '设置Telnet服务为自动

sc config tlntsvr start= disabled     '设置telnet服务为禁止

启动或停止及暂停服务

sc start tlntsvr     '启动Telnet服务

sc stop tlntsvr     '停止Telnet服务

Sc pause tlntsvr     '暂停Telnet服务

删除服务

Sc delete tlntsvr '删除Telnet服务，，但***不要删除系统自带服务。。。

创建服务

sc create test binpath= c:\windows\notepad.exe start= auto ‘创建Notepad.exe为Test服务，启动方式为自动

 

 

SC help

------------------------------

DESCRIPTION:
        SC is a command line program used for communicating with the
        NT Service Controller and services.
USAGE:
        sc <server> [command] [service name] <option1> <option2>...

        The option <server> has the form ""
        Further help on commands can be obtained by typing: "sc [command]"
        Commands:
          query-----------Queries the status for a service, or
                          enumerates the status for types of services.
          queryex---------Queries the extended status for a service, or
                          enumerates the status for types of services.
          start-----------Starts a service.
          pause-----------Sends a PAUSE control request to a service.
          interrogate-----Sends an INTERROGATE control request to a service.
          continue--------Sends a CONTINUE control request to a service.
          stop------------Sends a STOP request to a service.
          config----------Changes the configuration of a service (persistant).
          description-----Changes the description of a service.
          failure---------Changes the actions taken by a service upon failure.
          sidtype---------Changes the service SID type of a service.
          qc--------------Queries the configuration information for a service.
          qdescription----Queries the description for a service.
          qfailure--------Queries the actions taken by a service upon failure.
          qsidtype--------Queries the service SID type of a service.
          delete----------Deletes a service (from the registry).
          create----------Creates a service. (adds it to the registry).
          control---------Sends a control to a service.
          sdshow----------Displays a service's security descriptor.
          sdset-----------Sets a service's security descriptor.
          showsid---------Displays the service SID string corresponding to an ar
bitrary name.
          GetDisplayName--Gets the DisplayName for a service.
          GetKeyName------Gets the ServiceKeyName for a service.
          EnumDepend------Enumerates Service Dependencies.

        The following commands don't require a service name:
        sc <server> <command> <option>
          boot------------(ok | bad) Indicates whether the last boot should
                          be saved as the last-known-good boot configuration
          Lock------------Locks the Service Database
          QueryLock-------Queries the LockStatus for the SCManager Database
EXAMPLE:
        sc start MyService

Would you like to see help for the QUERY and QUERYEX commands? [ y | n ]:

本文转自 qq8658868 51CTO博客，原文链接：http://blog.51cto.com/hujizhou/1039990，如需转载请自行联系原作者