更新时间:2022-07-01 01:51:19
Change the SATA Operation Setting From RAID Autodetect / ATA to RAID Autodetect / AHCI in System Setup
|
1. Restart the computer.
2. Press <F2> immediately after the keyboard LEDs flash to enter the BIOS (System Setup).
3. In the System Setup screen, press <Up Arrow> or <Down Arrow> to highlight the Drives section, and then press <Enter>.
4. Press the <Up Arrow> or <Down Arrow> to highlight the SATA Operation section, and then press <Enter>.
5. Press the <Up Arrow> or <Down Arrow> to highlight RAID Autodetect / AHCI, and then press <Enter>.
6. Press <Esc> to exit the System Setup.
7. Press <Up Arrow> or <Down Arrow> to highlight Save/Exit, and then press <Enter>. The computer restarts.
|