nagios监控http（借助脚本）

修改后的脚本如下（需添加指示灯的状态）

# vi httpd.sh

#!/bin/bash

Port=`netstat -ntpl | grep httpd | awk -F[:" "]+ '{print $4}'`
if [ $Port == "80" ];then
echo "OK - http is running" 
exit 0
else
echo "CRITICAL - http is down" 
/sbin/service httpd restart
exit 2
fi
   
:wq

注：0 指的是状态灯绿灯，2指的是红灯，黄灯不用     并且宕了之后再次check时就能自动重启

# cp httpd.sh  /usr/local/nagios/libexec

# chmod +x /usr/local/nagios/libexec/httpd.sh
 
# mount /dev/cdrom /media/cdrom

# rpm -ivh sudo-1.6.9pl7-3.el5.i386.rpm

# visudo

#Defaults    requiretty        (注释掉)

nagios ALL=(ALL) NOPASSWD:/usr/local/nagios/libexec/httpd.sh    (多个脚本的话设置多行)
 
:wq
 
# su - nagios -c 'sudo /usr/local/nagios/libexec/httpd.sh'    (看看执行是否成功)
 
# vi /usr/local/nagios/etc/nrpe.cfg
 
command[check_http]=/usr/bin/sudo /usr/local/nagios/libexec/httpd.sh
 
:wq
 
# killall nrpe
 
# /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
 
# vi /usr/local/nagios/etc/objects/ming.cfg

define service{
          use              generic-service
          host_name        ming
          service_description http
          check_command      check_nrpe!check_http
}
 
:wq
 
 
# service nagios restart

本文转自linux博客51CTO博客，原文链接http://blog.51cto.com/yangzhiming/845144如需转载请自行联系原作者

yangzhimingg