root@test ~]# ping 192.168.2.1 -c 10 | awk '{ print $0"\t" strftime("%H:%M:%S",systime()) } '
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.    10:30:21
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=0.436 ms    10:30:21
64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=0.343 ms    10:30:22
64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=0.368 ms    10:30:23
64 bytes from 192.168.2.1: icmp_seq=4 ttl=64 time=0.280 ms    10:30:24
64 bytes from 192.168.2.1: icmp_seq=5 ttl=64 time=0.308 ms    10:30:25
64 bytes from 192.168.2.1: icmp_seq=6 ttl=64 time=0.360 ms    10:30:26
64 bytes from 192.168.2.1: icmp_seq=7 ttl=64 time=0.319 ms    10:30:27
64 bytes from 192.168.2.1: icmp_seq=8 ttl=64 time=0.274 ms    10:30:28
64 bytes from 192.168.2.1: icmp_seq=9 ttl=64 time=0.360 ms    10:30:29
64 bytes from 192.168.2.1: icmp_seq=10 ttl=64 time=0.265 ms    10:30:30
    10:30:30
--- 192.168.2.1 ping statistics ---    10:30:30
10 packets transmitted, 10 received, 0% packet loss, time 9000ms    10:30:30
rtt min/avg/max/mdev = 0.265/0.331/0.436/0.052 ms    10:30:30
然后我们把信息输出到文本：
[root@test ~]# ping 192.168.2.1 -c 10 | awk '{ print $0"\t" strftime("%H:%M:%S",systime()) } '>ping.log
[root@test ~]# cat ping.log
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.    10:37:23
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=0.398 ms    10:37:23
64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=0.288 ms    10:37:24
64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=0.465 ms    10:37:25
64 bytes from 192.168.2.1: icmp_seq=4 ttl=64 time=0.310 ms    10:37:26
64 bytes from 192.168.2.1: icmp_seq=5 ttl=64 time=0.275 ms    10:37:27
64 bytes from 192.168.2.1: icmp_seq=6 ttl=64 time=0.247 ms    10:37:28
64 bytes from 192.168.2.1: icmp_seq=7 ttl=64 time=0.339 ms    10:37:29
64 bytes from 192.168.2.1: icmp_seq=8 ttl=64 time=0.270 ms    10:37:30
64 bytes from 192.168.2.1: icmp_seq=9 ttl=64 time=0.297 ms    10:37:31
64 bytes from 192.168.2.1: icmp_seq=10 ttl=64 time=0.289 ms    10:37:32
    10:37:32
--- 192.168.2.1 ping statistics ---    10:37:32
10 packets transmitted, 10 received, 0% packet loss, time 9000ms    10:37:32
rtt min/avg/max/mdev = 0.247/0.317/0.465/0.067 ms    10:37:32
最后，我们需要把任务放到后台去：
[root@test ~]# nohup ping 192.168.2.1 -c 10 | awk '{ print $0"\t" strftime("%H:%M:%S",systime()) } '>ping1.log &
[1] 2616
[root@test ~]# ls
anaconda-ks.cfg  check1.sh  Desktop  eygle.com  httpd  login  pass.conf  ping1.log  ping.log  test1.sh  test1.sh1
[root@test ~]# cat ping1.log 
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.    10:40:22
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=0.373 ms    10:40:22
64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=0.343 ms    10:40:23
64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=0.335 ms    10:40:24
64 bytes from 192.168.2.1: icmp_seq=4 ttl=64 time=0.299 ms    10:40:25
64 bytes from 192.168.2.1: icmp_seq=5 ttl=64 time=0.372 ms    10:40:26
64 bytes from 192.168.2.1: icmp_seq=6 ttl=64 time=0.236 ms    10:40:27
64 bytes from 192.168.2.1: icmp_seq=7 ttl=64 time=0.394 ms    10:40:28
64 bytes from 192.168.2.1: icmp_seq=8 ttl=64 time=0.317 ms    10:40:29
64 bytes from 192.168.2.1: icmp_seq=9 ttl=64 time=0.490 ms    10:40:30
64 bytes from 192.168.2.1: icmp_seq=10 ttl=64 time=1.65 ms    10:40:31
    10:40:31
--- 192.168.2.1 ping statistics ---    10:40:31
10 packets transmitted, 10 received, 0% packet loss, time 9001ms    10:40:31
rtt min/avg/max/mdev = 0.236/0.480/1.650/0.395 ms    10:40:31

注：nohup ping 192.168.2.1 -c 10 | awk '{ print $0"\t" strftime("%Y-%m-%d %H:%M:%S",systime()) } '>ping1.log 2>&1 &

这样每隔4K左右会打印到文件

本文转自 chengxuyonghu 51CTO博客，原文链接：http://blog.51cto.com/6226001001/1894127，如需转载请自行联系原作者