When I added 6 individual filters in the configuration:

And run it:

The error is “Filter condition is too complex”

The batch request URL is as below:

https://jerry:1300/sap/opu/odata/sap/Z_SALESVOLUMEANALYSISQUERY_CDS/Z_SALESVOLUMEANALYSISQUERY(P_ExchangeRateType=%27M%27,P_DisplayCurrency=%27EUR%27)/Results?KaTeX parse error: Expected 'EOF', got '&' at position 76: …DisplayCurrency&̲filter=((((BillingDocumentDateYear%20eq%20%272015%27)%20or%20(BillingDocumentDateYear%20eq%20%272016%27)%20or%20(BillingDocumentDateYear%20eq%20%272017%27))%20and%20((BillingDocDateYearQuarter%20eq%20%271.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%272.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%271.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%272.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2017%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2017%27))%20and%20((BillingDocDateYearMonth%20eq%20%2702.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2705.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2706.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2707.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2708.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2709.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2710.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2711.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2712.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2701.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2702.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2703.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2704.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2705.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2706.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2709.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2711.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2708.2017%27)%20or%20(BillingDocDateYearMonth%20eq%20%2710.2017%27)))%20and%20((SalesOrganization%20eq%20%270001%27)%20or%20(SalesOrganization%20eq%20%270012%27)%20or%20(SalesOrganization%20eq%20%27ZBG1%27)%20or%20(SalesOrganization%20eq%20%27ZZZ1%27))%20and%20(BillingDocumentDateYear%20eq%20%272015%27))&$format=json

Seems indeed it’s very complex… but all the filters are necessary, looks like I have to try Smart Filter instead…

I’ve copied the configuration, you could use the copied one:

我找到了具体引起这个错误的ABAP code，一会给你说怎么定位：

现在在看怎么避免这个error。你第一次添加step时能够正常工作，因为it_filter_select_options和iv_filter_string都是有值的：

而添加第二个step时，it_filter_select_options不知为何为空了，所以框架检查出错：

还需要继续看。第一个step传到后台的url:

GET Z_SALESVOLUMEANALYSISQUERY(P_ExchangeRateType=%27M%27,P_DisplayCurrency=%27EUR%27)/Results?KaTeX parse error: Expected 'EOF', got '&' at position 74: …DisplayCurrency&̲filter=((((BillingDocumentDateYear%20eq%20%272015%27)%20or%20(BillingDocumentDateYear%20eq%20%272016%27)%20or%20(BillingDocumentDateYear%20eq%20%272017%27))%20and%20((BillingDocDateYearQuarter%20eq%20%271.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%272.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%271.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%272.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2017%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2017%27))%20and%20((BillingDocDateYearMonth%20eq%20%2702.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2705.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2706.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2707.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2708.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2709.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2710.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2711.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2712.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2701.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2702.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2703.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2704.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2705.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2706.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2709.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2711.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2708.2017%27)%20or%20(BillingDocDateYearMonth%20eq%20%2710.2017%27)))%20and%20((SalesOrganization%20eq%20%270001%27)%20or%20(SalesOrganization%20eq%20%270012%27)%20or%20(SalesOrganization%20eq%20%27ZBG1%27)%20or%20(SalesOrganization%20eq%20%27ZZZ1%27)))&f o r m a t = j s o n H T T P / 1.1 第 二 个 s t e p 的 u r l : G E T Z S A L E S V O L U M E A N A L Y S I S Q U E R Y ( P E x c h a n g e R a t e T y p e = format=json HTTP/1.1 第二个step的url: GET Z_SALESVOLUMEANALYSISQUERY(P_ExchangeRateType=%27M%27,P_DisplayCurrency=%27EUR%27)/Results?format=jsonHTTP/1.1第二个step的url:GETZ

S

ALESVOLUMEANALYSISQUERY(P

E

xchangeRateType=select=BillingDocDateYearQuarter,DisplayCurrency,NetAmountInDisplayCurrency&f i l t e r = ( ( ( ( B i l l i n g D o c u m e n t D a t e Y e a r filter=((((BillingDocumentDateYear%20eq%20%272015%27)%20or%20(BillingDocumentDateYear%20eq%20%272016%27)%20or%20(BillingDocumentDateYear%20eq%20%272017%27))%20and%20((BillingDocDateYearQuarter%20eq%20%271.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%272.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2015%27)%20or%20(BillingDocDateYearQuarter%20eq%20%271.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%272.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2016%27)%20or%20(BillingDocDateYearQuarter%20eq%20%273.2017%27)%20or%20(BillingDocDateYearQuarter%20eq%20%274.2017%27))%20and%20((BillingDocDateYearMonth%20eq%20%2702.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2705.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2706.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2707.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2708.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2709.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2710.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2711.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2712.2015%27)%20or%20(BillingDocDateYearMonth%20eq%20%2701.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2702.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2703.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2704.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2705.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2706.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2709.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2711.2016%27)%20or%20(BillingDocDateYearMonth%20eq%20%2708.2017%27)%20or%20(BillingDocDateYearMonth%20eq%20%2710.2017%27)))%20and%20((SalesOrganization%20eq%20%270001%27)%20or%20(SalesOrganization%20eq%20%270012%27)%20or%20(SalesOrganization%20eq%20%27ZBG1%27)%20or%20(SalesOrganization%20eq%20%27ZZZ1%27))%20and%20(BillingDocumentDateYear%20eq%20%272016%27))&filter=((((BillingDocumentDateYearformat=json HTTP/1.1在第二个step时，上面的方法解析select option出错了：因此最后没有select option传到后台框架去，所以引起了那个错误。

解析出错的原因

这个BILLINGDOCUMENTDATEYEAR出现在了一个内表里，expect的行为是不出现。还需要看。比较两个step发送url有何差异，已经能看出原因了，蓝色的区域是第二个step新增加的url:

之前的研究概括起来就是：在第一个step的chart上选中2016年那个节点，然后创建第二个step，此时给后台发送的url如下：

这时选中的context 2016年就是上图紫色的内容，通过debug框架，发现其验证逻辑认为紫色的2016年是不合法的，因为and 左边的filter里已经包含了这个条件了，所以报错。这些url都是APF runtime 负责拼接再传给后台的，我们没办法控制，这个问题可能需要和APF的同事一起来看：

或者是我们filter的modelling有问题

或者是APF 处理filter这块的JS代码有问题

We got this “filter condition is too complex error” again, add sap-apf-filter-reduction=true in the URL doesn’t work this time.

Go to:

https://jerry:1300/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html?sap-client=928#BillingDocument-testSalesVolume?EvaluationId=.E.1464769533103&sap-xapp-state=ASMUJD92Q3C7JZ6BJ9G5AA8DNIVBC7IKQFPAM4WD&/

Don’t change filter, add a step, the error will occur.I checked the error log and debugged the code like we did last time, I found that the cause is not the same as the last time:Filter check code on ER9:

It seems the code check if there’re more than one filters have more than one values in the condition, if so, it will raise error.