nagios图像（nagiosgraph）（未成）

http://cdnetworks-kr-1.dl.sourceforge.net/project/nagiosgraph/nagiosgraph/1.4.4/nagiosgraph-1.4.4.tar.gz

 http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rrdtool-1.2.18-1.el5.rf.i386.rpm (32位)
http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/perl-rrdtool-1.2.18-1.el5.rf.i386.rpm

http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/rrdtool-1.2.18-1.el5.rf.x86_64.rpm  （64位）
http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/perl-rrdtool-1.2.18-1.el5.rf.x86_64.rpm

# rpm -ivh rrdtool-1.2.18-1.el5.rf.i386.rpm

# rpm -ivh perl-rrdtool-1.2.18-1.el5.rf.i386.rpm

#tar zxf nagiosgraph-1.4.4.tar.gz

# cd nagiosgraph-1.4.4

# perl Makefile.PL

# vi install.pl

把所有的www-data改成nobody   （web的用户）

:wq

# make && make install     

第一个路径改为/usr/local/nagios/nagiosgraph其它直接回车

# cd /usr/local/nagios/nagiosgraph/etc

# cp nagiosgraph-apache.conf /usr/local/apache/conf

# vi /usr/local/apache/conf/httpd.conf

Include conf/nagiosgraph-apache.conf

:wq

# service httpd restart

# vi /usr/local/nagios/etc/nagios.cfg

service_perfdata_file=/usr/local/nagios/nagiosgraph/var/perfdata.log
service_perfdata_file_template=$LASTSERVICECHECK$||$HOSTNAME$||$SERVICEDESC$||$SERVICEOUTPUT$||$SERVICEPERFDATA$
service_perfdata_file_mode=a
service_perfdata_file_processing_interval=30
service_perfdata_file_processing_command=process-service-perfdata

process_performance_data=1 (原为0)

:wq

 

# cp cgi/*.cgi    /usr/local/nagios/sbin

# cp bin/insert.pl /usr/local/nagios/libexec

# cp share/nagios/graph.css  /usr/local/nagios/share

# cp share/nagiosgraph.js    /usr/local/nagios/share

 

# vi /usr/local/nagios/etc/objects/commands.cfg

# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/local/nagios/libexec/insert.pl
        }
# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/local/nagios/libexec/insert.pl
        }

:wq

 

注：要注释掉原有对process-service-perfdata和process-host-perfdata的定义
 

# vi /usr/local/nagios/etc/objects/yang.cfg

为主机添加小太阳图标

# vi /usr/local/nagios/etc/objects/yang.cfg

define host {
use       linux-server
host_name    yang
address      192.168.1.10
action_url  /nagiosgraph/cgi-bin/show.cgi?host=$HOSTNAME$
}

:wq

为单个服务添加小太阳图标

# vi /usr/local/nagios/etc/objects/yang.cfg

define service {
use        generic-service
host_name   yang
service_description      check_load
check_command       check_nrpe!check_load
normal_check_interval     2
action_url /nagiosgraph/cgi-bin/show.cgi?host=$HOSTNAME$&srv=$SERVICEDESC$

}

:wq

重启nagios

# service nagios restart

 # ls /usr/local/nagios/nagiosgraph/var/rrd     (看有没有生成nagios中定义的主机名文件)

注：我做的没有生成主机名文件，没有生成图表，原因还在研究中

本文转自linux博客51CTO博客，原文链接http://blog.51cto.com/yangzhiming/860016如需转载请自行联系原作者

yangzhimingg