分享程序员开发的那些事...
更新时间：2022-09-27 09:53:08
一、高级文件系统管理
1） 设定文件系统配额
2） 设定和管理软RAID设备
3） 配置逻辑卷
4） 设定LVM快照
5） btrfs文件系统
二、配置磁盘配额
演示步骤如下：
1、分区挂载将/home目录下的所有文件拷贝至/dev/sdc1
fdsik /dev/sdc
mount /dec/sdc1 /mnt/test
mv /home/* /mnt/test
mount /dev/sdc1 /home
2、启动配额挂载选项
/dev/sdc1 /mnt/test ext4 defaults 0 0
/dev/sdc1 /home ext4 usrquota,grpquota 0 0
3、启动数据库,如遇到报错则关闭防火墙及重新挂载(mount -0 remount usrquota,grpquota)
setenforce 0 #临时关闭selinux
getenforce #查看selinux状态
quotacheck -cug /home #创建磁盘配额数据库
4、启动数据库
quotaon -p /home #查看是否已启动数据库
quotaon /home #启动数据库
repquota /home #报告各个家目录下用户的默认磁盘配额
5、配置配额项
edquota alren #给alren用户配置配额
setquota alren 100000 150000 0 0 /home
6、测试
dd if=/dev/zero of=/home/alren/testfile bs=1M count=100
dd if=/dev/zero of=/home/alren/testfiel bs=1M count=160
代码演示：
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
|
[root@centos6 ~]# cat /etc/fstab
## /etc/fstab# Created by anaconda on Thu Aug 11 03:07:57 2016## Accessible filesystems, by reference, are maintained under '/dev/disk'# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info#tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
/dev/sdb1 swap swap pri=10 0 0
/swapfile swap swap defaults,pri=100 0 0
/dev/sdc1 /mnt/test ext4 defaults 0 0
/dev/sdc1 /home ext4 usrquota,grpquota 0 0
UUID="39208cf4-4d84-430b-ab53-7a26ad9d786d" /mnt/lv0 ext4 defaults 0 0
UUID=240533cf-b37f-4460-974f-702bab867da5 / ext4 defaults1 1UUID=4e245c68-a392-4ce9-9a99-5d32d8d43872 /boot ext4 defaults1 2
UUID=86aa7b74-24df-4043-ba83-f3b41a99ce0e /testdir ext4 defaults1 2
[root@centos6 home]# mount -o remount,usrquota,grpquota /home
[root@centos6 home]# quotacheck -cug /home
[root@centos6 home]# ls
alren aquota.group aquota.user chen cheng chenggg lost+found[root@centos6 home]# quotaon -p /home
group quota on /home (/dev/sdc1) is off
user quota on /home (/dev/sdc1) is off
[root@centos6 home]# quotaon /home
[root@centos6 home]# quotaon -p /home
group quota on /home (/dev/sdc1) is on
user quota on /home (/dev/sdc1) is on
[root@centos6 home]# setquota alren 100000 150000 0 0 /home
[root@centos6 ~]# repquota /home
*** Report for user quotas on device /dev/sdc1
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
User used soft hard grace used soft hard grace----------------------------------------------------------------------root -- 37952 0 0 967 0 0chen -- 43644 0 0 3198 0 0chenggg -- 32 0 0 8 0 0cheng -- 32 0 0 8 0 0alren -- 32 100000 150000 9 0 0[root@centos6 ~]#
[root@centos6 home]# edquota alren
[root@centos6 home]# su - alren
[alren@centos6 ~]$ quota alren
Disk quotas for user alren (uid 524):
Filesystem blocks quota limit grace files quota limit grace
/dev/sdc1 32 100000 150000 8 0 0
[alren@centos6 ~]$ repquota /home
repquota: Cannot open quotafile /home/aquota.user: 权限不够
repquota: Quota file not found or has wrong format.
repquota: Not all specified mountpoints are using quota.
[alren@centos6 ~]$ dd if=/dev/zero of=/home/alren bs=1M count=100
dd: 正在打开"/home/alren": 是一个目录
[alren@centos6 ~]$ dd if=/dev/zero of=/home/alren/testfile bs=1M count=100
sdc1: warning, user block quota exceeded.
记录了100+0 的读入记录了100+0 的写出104857600字节(105 MB)已复制，0.613277 秒，171 MB/秒[alren@centos6 ~]$ dd if=/dev/zero of=/home/alren/testfile bs=1M count=160
sdc1: warning, user block quota exceeded.
sdc1: write failed, user block limit reached.dd: 正在写入"/home/alren/testfile": 超出磁盘限额
记录了147+0 的读入记录了146+0 的写出153567232字节(154 MB)已复制，0.876813 秒，175 MB/秒[alren@centos6 ~]$ |
三、独立冗余磁盘整列(RAID，本文所述为软RAID)
1、简介
RAID:Redundant Arrays of Inexpensive(Independent)Disks，1988年由加利福尼亚大学伯克利分校（University of California-Berkeley） “A Case for Redundant Arrays of Inexpensive Disks”提出。多个磁盘合成一个“阵列”来提供更好的性能、冗余，或者两者都提供，就叫做独立磁盘冗余整列。
2、特点
1）提高IO性能，提升磁盘读写
2）提高耐用性，磁盘冗余来实现
3）多块磁盘组织在一起的工作方式有所不同
3、raid级别
RAID-0：将数据切割成等分，然后按次序存储在磁盘中
RAID-1：将数据切割成等分，然后分别存入各个磁盘中
RAID-5：将数据切割成等分，然后按次序存储在磁盘中，并且每个磁盘轮流存储校验信息
......
RAID-6: 将数据切割成等分，然后按次序存储在磁盘中，并且每个磁盘轮流存储校验信息，且存两份校验信息
RAID-10: 先做raid1，然后做raid0即可
RAID-01: 先做raid0，然后做raid1即可
3、raid级别及其特性
RAID-0；读写性能提升
可用空间n*min(s1,s2...)
无容错能力
最少磁盘数量：2个
RAID-1：读性能提升，写性能有所下降
1*min(s1,s2,...)
有冗余能力
最少磁盘数量：2,2N
RAID-5: 读写性能提升
可用空间(N-1)*min(s1,s2)
有容错能力，只允许坏一块磁盘
最少磁盘数量：3,3+
RAID-6：读写性能提升
可用空间(N-2)*min(s1,s2,...)
有容错能力允许坏两块磁盘
最少磁盘数量：4,4+
RAID-10：读、写性能提升
可用空间：N*min(S1,S2,...)/2
有容错能力：每组镜像最多只能坏一块
最少磁盘数：4, 4+
RAID-01：读、写性能提升
可用空间：N*min(S1,S2,...)/2
有容错能力：每组镜像最多只能坏一块
最少磁盘数：4, 4+
常用级别：RAID-0, RAID-1, RAID-5, RAID-10, RAID-50
软RAID-5基本选项：
mdadm:为软raid提供管理界面，为空余磁盘添加冗余，RAID设备可为/dev/md0、/dev/md1、/dev/md2、 /dev/md3等等
mdadm命令：
语法格式：mdadm [mode] <raiddevice> [options] <component-devices>
模式：
创建：-C
装配：-A
管理：-f,-r,-a
-C:创建模式
-n #:使用#个快设备来创建次RAID
-l #:指明RAID及级别
-a {yes|no}:自动创建目标raid设备的设备文件
-c chunck_size:指明块设备的大小
-x #:指明空闲磁盘个数
-D: 显示raid的详细信息
mdadm -D /dev/md#
管理模式：
-f:标记指定磁盘为损坏
-a:添加磁盘
-r:移除磁盘
观察md的模式：
cat /proc/mdstat
停止md设备：
mdamd -S /dev/md#
软RAID-5实现步骤：
1、创建磁盘分区，本实验使用5块磁盘做实验，其中4块为真实使用，1块为冗余备份
fdisk /dev/sd{b,c,d,e,f}1 #磁盘分区10G并改其文件类型为fd
2、创建raid设备
mdadm -C /dev/md0 -a yes -l 5 -n 4 -x1 /dev/sd{b,c,d,e,f}1
mdamd -D /dev/md0
cat /proc/mdstat
3、格式化创建的md0设备
mkfs.ext4 /dev/md0
4、设置开机自动挂载
vim /etc/fstab
UUID="b92ddd51-c555-4948-b1d5-8563b697a2f1" /mnt/raid ext4 defaults 0 0
5、生成配置文件/etc/mdadm.conf
mdadm -Ds /dev/md0 > /etc/mdadm.conf
mdadm -S /dev/md0 停止raid
mdadm -A /dev/md0 启动raid
6、测试
mdadm /dev/md0 -f /dev/sdf1 #模拟损坏
mdadm /dev/md0 -r /dev/sdf1 #删除成员
mdadm /dev/md0 -a /dev/sdf1 #增加
mdadm -G /dev/md0 -n 6 -a /dev/sdd4 #增加成员
mkfs.ext4 /dev/md0 #重新格式化
7、删除raid
umount /mnt/raid
mdadm -S /dev/md0 停止raid
rm -f /etc/mdadm.conf
vi /etc/fstab
fdisk /dev/sda
mdadm --zero-superblock /dev/sdd1
演示：
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
|
[root@centos7 ~]# mdadm -C /dev/md0 -a yes -l 5 -n 4 -x1 /dev/sd{b,c,d,e,f}1
mdadm: /dev/sdb1 appears to contain an ext2fs file system
size=5242880K mtime=Thu Jan 1 08:00:00 1970
Continue creating array? ymdadm: Defaulting to version 1.2 metadatamdadm: array /dev/md0 started.
[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 5
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:28:42 2016
State : clean, degraded, recovering
Active Devices : 3
Working Devices : 5 Failed Devices : 0
Spare Devices : 2
Layout : left-symmetric
Chunk Size : 512K
Rebuild Status : 18% complete
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 3
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 spare rebuilding /dev/sde1
4 8 81 - spare /dev/sdf1
[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 5
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:29:42 2016
State : clean, degraded, recovering
Active Devices : 3
Working Devices : 5 Failed Devices : 0
Spare Devices : 2
Layout : left-symmetric
Chunk Size : 512K
Rebuild Status : 88% complete
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 15
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 spare rebuilding /dev/sde1
4 8 81 - spare /dev/sdf1
[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 5
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:29:52 2016
State : clean
Active Devices : 4
Working Devices : 5 Failed Devices : 0
Spare Devices : 1
Layout : left-symmetric
Chunk Size : 512K
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 18
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 active sync /dev/sde1
4 8 81 - spare /dev/sdf1
[root@centos7 ~]# mkfs.ext4 /dev/md0
mke2fs 1.42.9 (28-Dec-2013)Filesystem label=OS type: Linux
Block size=4096 (log=2)Fragment size=4096 (log=2)Stride=128 blocks, Stripe width=384 blocks1966080 inodes, 7858176 blocks392908 blocks (5.00%) reserved for the super user
First data block=0Maximum filesystem blocks=2155872256240 block groups
32768 blocks per group, 32768 fragments per group8192 inodes per groupSuperblock backups stored on blocks:32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,4096000Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[root@centos7 ~]# mdadm -Ds /dev/md0 >/etc/mdadm.conf
[root@centos7 ~]# mdadm -S /dev/md0
mdadm: stopped /dev/md0
[root@centos7 ~]# mdadm -A /dev/md0
mdadm: /dev/md0 has been started with 4 drives and 1 spare.
[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 5
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:30:29 2016
State : clean
Active Devices : 4
Working Devices : 5 Failed Devices : 0
Spare Devices : 1
Layout : left-symmetric
Chunk Size : 512K
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 18
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 active sync /dev/sde1
4 8 81 - spare /dev/sdf1
[root@centos7 ~]# mdadm /dev/md0 -f /dev/sdb1
mdadm: set /dev/sdb1 faulty in /dev/md0
[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 5
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:32:19 2016
State : clean, degraded, recovering
Active Devices : 3
Working Devices : 4 Failed Devices : 1
Spare Devices : 1
Layout : left-symmetric
Chunk Size : 512K
Rebuild Status : 5% complete
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 20
Number Major Minor RaidDevice State
4 8 81 0 spare rebuilding /dev/sdf1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 active sync /dev/sde1
0 8 17 - faulty /dev/sdb1
[root@centos7 ~]# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]md0 : active raid5 sdb1[0](F) sdf1[4] sde1[5] sdd1[2] sdc1[1] 31432704 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [_UUU]
[========>............] recovery = 43.8% (4592156/10477568) finish=0.7min speed=129724K/sec
unused devices: <none>[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 5
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:33:40 2016
State : clean
Active Devices : 4
Working Devices : 4 Failed Devices : 1
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 37
Number Major Minor RaidDevice State
4 8 81 0 active sync /dev/sdf1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 active sync /dev/sde1
0 8 17 - faulty /dev/sdb1
[root@centos7 ~]# mdadm -G /dev/md0 -n 6 -a /dev/sdb2
mdadm: Need 2 spares to avoid degraded array, and only have 1. Use --force to over-ride this check.
[root@centos7 ~]# mdadm -G /dev/md0 -n 6 -a /dev/sdb2 --force
mdadm: added /dev/sdb2
mdadm: Failed to initiate reshape!unfreeze[root@centos7 ~]# mkfs.ext4 /dev/md0
mke2fs 1.42.9 (28-Dec-2013)Filesystem label=OS type: Linux
Block size=4096 (log=2)Fragment size=4096 (log=2)Stride=128 blocks, Stripe width=384 blocks1966080 inodes, 7858176 blocks392908 blocks (5.00%) reserved for the super user
First data block=0Maximum filesystem blocks=2155872256240 block groups
32768 blocks per group, 32768 fragments per group8192 inodes per groupSuperblock backups stored on blocks:32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,4096000Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 6
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:34:55 2016
State : clean
Active Devices : 4
Working Devices : 5 Failed Devices : 1
Spare Devices : 1
Layout : left-symmetric
Chunk Size : 512K
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 41
Number Major Minor RaidDevice State
4 8 81 0 active sync /dev/sdf1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 active sync /dev/sde1
0 8 17 - faulty /dev/sdb1
6 8 18 - spare /dev/sdb2
[root@centos7 ~]# mdadm /dev/md0 -r /dev/sdb1
mdadm: hot removed /dev/sdb1 from /dev/md0
[root@centos7 ~]# mdadm /dev/md0 -a /dev/sdb1
mdadm: added /dev/sdb1
[root@centos7 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Tue Aug 30 11:28:31 2016
Raid Level : raid5
Array Size : 31432704 (29.98 GiB 32.19 GB)
Used Dev Size : 10477568 (9.99 GiB 10.73 GB)
Raid Devices : 4
Total Devices : 6
Persistence : Superblock is persistent
Update Time : Tue Aug 30 11:35:46 2016
State : clean
Active Devices : 4
Working Devices : 6 Failed Devices : 0
Spare Devices : 2
Layout : left-symmetric
Chunk Size : 512K
Name : centos7.localdomain:0 (local to host centos7.localdomain)
UUID : 40fbcb9e:3de8f63f:0ec52e1d:98020537
Events : 43
Number Major Minor RaidDevice State
4 8 81 0 active sync /dev/sdf1
1 8 33 1 active sync /dev/sdc1
2 8 49 2 active sync /dev/sdd1
5 8 65 3 active sync /dev/sde1
6 8 18 - spare /dev/sdb2
7 8 17 - spare /dev/sdb1
[root@centos7 ~]#
|
三、LVM(逻辑卷管理)
1、简介
LVM: Logical Volume Manager，允许对卷进行方便操作的抽象层，包括重新设定文件系统的大小，允许在多个物理设备间重新组织文件系统。将设备指定为物理卷，用一个或多个物理卷来创建一个卷组，物理卷是用固定大小的物理区域(PE)来定义，在物理卷上创建逻辑卷，然后在逻辑卷上创建文件系统。
2、pv管理工具
1）显示pv信息
pvs:简要pv信息
pvdisplay:详细pv信息
2）创建pv
pvcreate /dev/DEVICE
3、vg管理工具
1）显示卷组
vgs:简要vg信息
vgdisplay:详细vg信息
2)创建逻辑卷
vgcreate [-s #[kKmMgGtTpPeE]] VolumeGroupName PhysicalDevicePath [PhysicalDevicePath...]
3)管理卷组
vgextend VolumeGroupName PhysicalDevicePath [PhysicalDevicePath...] vgreduce VolumeGroupName PhysicalDevicePath [PhysicalDevicePath...]
4)删除卷组
先做vgremove，再做pvremove
4、lv工具
1)显示逻辑卷
lvs:显示逻辑卷简单信息
lvdisplay:显示详细逻辑卷信息
2）删除逻辑卷
lvremove /dev/VG_NAME/LV_NAME
3)重设文件系统大小
fsadm [options] resize device [new_size[BKMGTEP]] resize2fs [-f] [-F] [-M] [-P] [-p] device [new_size]
5)扩展逻辑卷
lvextend -L [+]#[mMgGtT] /dev/VG_NAME/LV_NAME
resize2fs /dev/VG_NAME/LV_NAME
6）缩减逻辑卷
umount /dev/VG_NAME/LV_NAME
e2fsck -f /dev/VG_NAME/LV_NAME
resize2fs /dev/VG_NAME/LV_NAME
[mMgGtT]
lvreduce -L [-]#[mMgGtT] /dev/VG_NAME/LV_NAME
演示：
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
|
[root@centos6 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTsr0 11:0 1 3.7G 0 romsda 8:0 0 120G 0 disk├─sda1 8:1 0 200M 0 part /boot
├─sda2 8:2 0 80G 0 part /├─sda3 8:3 0 20G 0 part /testdir
├─sda4 8:4 0 1K 0 part├─sda5 8:5 0 4G 0 part [SWAP]└─sda6 8:6 0 2G 0 partsdb 8:16 0 120G 0 disk└─sdb1 8:17 0 2G 0 part [SWAP]sdc 8:32 0 20G 0 disk├─sdc2 8:34 0 10G 0 part└─sdc1 8:33 0 2G 0 part /mnt/test
sdd 8:48 0 20G 0 disksde 8:64 0 20G 0 disksdf 8:80 0 20G 0 disk[root@centos6 ~]#
[root@centos6 ~]# pvcreate /dev/sd{c2,d}
Physical volume "/dev/sdc2" successfully created
Physical volume "/dev/sdd" successfully created
[root@centos6 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdc2 lvm2 ---- 10.00g 10.00g
/dev/sdd lvm2 ---- 20.00g 20.00g
[root@centos6 ~]# pvdisplay
"/dev/sdc2" is a new physical volume of "10.00 GiB"
--- NEW Physical volume ---
PV Name /dev/sdc2
VG Name
PV Size 10.00 GiB
Allocatable NO
PE Size 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID PZRtfc-8dci-dW2V-ayy6-RVHQ-6oMh-q8LhwC
"/dev/sdd" is a new physical volume of "20.00 GiB"
--- NEW Physical volume ---
PV Name /dev/sdd
VG Name
PV Size 20.00 GiB
Allocatable NO
PE Size 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID X7gN2P-RysJ-Woci-IiIu-IphR-elkT-sAtSID
################创建逻辑卷组##################[root@centos6 ~]# vgcreate vg0 /dev/sd{c2,d}
Volume group "vg0" successfully created
[root@centos6 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg0 2 0 0 wz--n- 30.00g 30.00g
[root@centos6 ~]# vgdisplay
--- Volume group ---
VG Name vg0
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 2
Act PV 2
VG Size 30.00 GiB
PE Size 4.00 MiB
Total PE 7679
Alloc PE / Size 0 / 0
Free PE / Size 7679 / 30.00 GiB
VG UUID gbfTZO-aqo8-kdfg-cLkM-xXug-VWRK-hl1qSA
################创建逻辑卷###################[root@centos6 ~]# lvcreate -n lv0 -L 15G vg0
Logical volume "lv0" created.
[root@centos6 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv0 vg0 -wi-a----- 15.00g
[root@centos6 ~]# lvdisplay
--- Logical volume ---
LV Path /dev/vg0/lv0
LV Name lv0
VG Name vg0
LV UUID XJ1Nco-ZP4s-h93D-YkIy-DcbN-6TEq-4XXJDI
LV Write Access read/write
LV Creation host, time centos6.localdomain, 2016-08-24 21:26:41 +0800
LV Status available
# open 0
LV Size 15.00 GiB
Current LE 3840
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
[root@centos6 ~]# mkfs.ext4 /dev/vg
vg0/ vga_arbiter[root@centos6 ~]# mkfs.ext4 /dev/vg0/lv0
mke2fs 1.41.12 (17-May-2010)文件系统标签=操作系统:Linux块大小=4096 (log=2)分块大小=4096 (log=2)Stride=0 blocks, Stripe width=0 blocks983040 inodes, 3932160 blocks196608 blocks (5.00%) reserved for the super user
第一个数据块=0Maximum filesystem blocks=4026531840120 block groups
32768 blocks per group, 32768 fragments per group8192 inodes per groupSuperblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
正在写入inode表: 完成Creating journal (32768 blocks): 完成Writing superblocks and filesystem accounting information: 完成This filesystem will be automatically checked every 36 mounts or180 days, whichever comes first. Use tune2fs -c or -i to override.[root@centos6 ~]# vi /etc/fstab
[root@centos6 ~]# blkid /dev/vg
vg0/ vga_arbiter[root@centos6 ~]# blkid
/dev/sda2: UUID="240533cf-b37f-4460-974f-702bab867da5" TYPE="ext4"
/dev/sda1: UUID="4e245c68-a392-4ce9-9a99-5d32d8d43872" TYPE="ext4"
/dev/sda3: UUID="86aa7b74-24df-4043-ba83-f3b41a99ce0e" TYPE="ext4"
/dev/sda5: UUID="f8ef48ef-b141-48e5-9735-ff9089bd54ba" TYPE="swap"
/dev/sda6: UUID="ca0c47c7-edb0-4685-8b29-44c6a5bf7a11" TYPE="ext4" LABEL="MYHOME"
/dev/sdb1: UUID="443bb126-8dc0-45a3-acfe-9a37629bb511" TYPE="swap"
/dev/sdc2: UUID="PZRtfc-8dci-dW2V-ayy6-RVHQ-6oMh-q8LhwC" TYPE="LVM2_member"
/dev/sdd: UUID="X7gN2P-RysJ-Woci-IiIu-IphR-elkT-sAtSID" TYPE="LVM2_member"
/dev/mapper/vg0-lv0: UUID="bac8210f-143d-4f89-a3fe-b75be6060274" TYPE="ext4"
/dev/sdc1: UUID="7f140c30-7c34-4387-abac-b4687870463c" TYPE="ext4"
[root@centos6 ~]# vi /etc/fstab
[root@centos6 ~]# mount -a
[root@centos6 ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on/dev/sda2 82438832 5772100 72472428 8% /
tmpfs 502068 0 502068 0% /dev/shm
/dev/sda1 194241 39067 144934 22% /boot
/dev/sda3 20511356 45044 19417736 1% /testdir
/dev/sdc1 2005848 84784 1815840 5% /mnt/test
/dev/sdc1 2005848 84784 1815840 5% /home
/dev/mapper/vg0-lv0 15350768 38384 14525952 1% /mnt/lv0
[root@centos6 ~]# cd /mnt/lv0/
[root@centos6 lv0]# ls
lost+found[root@centos6 lv0]# df -h
Filesystem Size Used Avail Use% Mounted on/dev/sda2 79G 5.6G 70G 8% /
tmpfs 491M 0 491M 0% /dev/shm
/dev/sda1 190M 39M 142M 22% /boot
/dev/sda3 20G 44M 19G 1% /testdir
/dev/sdc1 2.0G 83M 1.8G 5% /mnt/test
/dev/sdc1 2.0G 83M 1.8G 5% /home
/dev/mapper/vg0-lv0 15G 38M 14G 1% /mnt/lv0
################扩展逻辑卷#################[root@centos6 lv0]# lvextend -L +6G /dev/vg0/lv0
Size of logical volume vg0/lv0 changed from 15.00 GiB (3840 extents) to 21.00 GiB (5376extents).
Logical volume lv0 successfully resized.
[root@centos6 lv0]# df -h
Filesystem Size Used Avail Use% Mounted on/dev/sda2 79G 5.6G 70G 8% /
tmpfs 491M 0 491M 0% /dev/shm
/dev/sda1 190M 39M 142M 22% /boot
/dev/sda3 20G 44M 19G 1% /testdir
/dev/sdc1 2.0G 83M 1.8G 5% /mnt/test
/dev/sdc1 2.0G 83M 1.8G 5% /home
/dev/mapper/vg0-lv0 15G 38M 14G 1% /mnt/lv0
[root@centos6 lv0]# resize2fs /dev/vg0/lv0
resize2fs 1.41.12 (17-May-2010)Filesystem at /dev/vg0/lv0 is mounted on /mnt/lv0; on-line resizing required
old desc_blocks = 1, new_desc_blocks = 2Performing an on-line resize of /dev/vg0/lv0 to 5505024 (4k) blocks.
The filesystem on /dev/vg0/lv0 is now 5505024 blocks long.
[root@centos6 lv0]# df -h
Filesystem Size Used Avail Use% Mounted on/dev/sda2 79G 5.6G 70G 8% /
tmpfs 491M 0 491M 0% /dev/shm
/dev/sda1 190M 39M 142M 22% /boot
/dev/sda3 20G 44M 19G 1% /testdir
/dev/sdc1 2.0G 83M 1.8G 5% /mnt/test
/dev/sdc1 2.0G 83M 1.8G 5% /home
/dev/mapper/vg0-lv0 21G 42M 20G 1% /mnt/lv0
##############新增逻辑卷组及加入逻辑卷################[root@centos6 ~]# pvcreate /dev/sde1
Physical volume "/dev/sde1" successfully created
[root@centos6 ~]# vgextend /dev/vg0/ /dev/sde
sde sde1[root@centos6 ~]# vgextend /dev/vg0/ /dev/sde1
Volume group name "vg0/" has invalid characters.
Cannot process volume group vg0/
[root@centos6 ~]# vgextend vg0 /dev/sde1
Volume group "vg0" successfully extended
[root@centos6 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg0 3 1 0 wz--n- 43.00g 22.00g
[root@centos6 ~]# lvs \
> LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv0 vg0 -wi-ao---- 21.00g
[root@centos6 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdc2 vg0 lvm2 a--u 10.00g 9.00g
/dev/sdd vg0 lvm2 a--u 20.00g 0
/dev/sde1 vg0 lvm2 a--u 13.00g 13.00g
[root@centos6 ~]# lvcreate -L +13G /dev/vg0/lv0
Volume group name expected (no slash)
Run `lvcreate --help' for more information.
[root@centos6 ~]# lvextend -L +13G /dev/vg0/lv0
Size of logical volume vg0/lv0 changed from 21.00 GiB (5376 extents) to 34.00 GiB (8704extents).
Logical volume lv0 successfully resized.
[root@centos6 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv0 vg0 -wi-ao---- 34.00g
[root@centos6 ~]# resize2fs /dev/vg0/lv0
resize2fs 1.41.12 (17-May-2010)Filesystem at /dev/vg0/lv0 is mounted on /mnt/lv0; on-line resizing required
old desc_blocks = 2, new_desc_blocks = 3Performing an on-line resize of /dev/vg0/lv0 to 8912896 (4k) blocks.
The filesystem on /dev/vg0/lv0 is now 8912896 blocks long.
[root@centos6 ~]# df -h |grep "vg0-lv0"
/dev/mapper/vg0-lv0 34G 45M 32G 1% /mnt/lv0
################删除lv/vg/pv##################[root@centos6 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTsr0 11:0 1 3.7G 0 romsda 8:0 0 120G 0 disk├─sda1 8:1 0 200M 0 part /boot
├─sda2 8:2 0 80G 0 part /├─sda3 8:3 0 20G 0 part /testdir
├─sda4 8:4 0 1K 0 part├─sda5 8:5 0 4G 0 part [SWAP]└─sda6 8:6 0 2G 0 partsdb 8:16 0 120G 0 disk└─sdb1 8:17 0 2G 0 part [SWAP]sdc 8:32 0 20G 0 disk├─sdc2 8:34 0 10G 0 part│ └─vg0-lv0 (dm-0) 253:0 0 34G 0 lvm /mnt/lv0
└─sdc1 8:33 0 2G 0 part /mnt/test
sdd 8:48 0 20G 0 disk└─vg0-lv0 (dm-0) 253:0 0 34G 0 lvm /mnt/lv0
sde 8:64 0 20G 0 disk└─sde1 8:65 0 13G 0 part └─vg0-lv0 (dm-0) 253:0 0 34G 0 lvm /mnt/lv0
sdf 8:80 0 20G 0 disk[root@centos6 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv0 vg0 -wi-ao---- 34.00g
[root@centos6 ~]# lvremove /dev/vg0/lv0
Logical volume vg0/lv0 contains a filesystem in use.
[root@centos6 ~]# umount /mnt/lv0/
[root@centos6 ~]# lvremove /dev/vg0/lv0
Do you really want to remove active logical volume lv0? [y/n]: y
Logical volume "lv0" successfully removed
[root@centos6 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdc2 vg0 lvm2 a--u 10.00g 10.00g
/dev/sdd vg0 lvm2 a--u 20.00g 20.00g
/dev/sde1 vg0 lvm2 a--u 13.00g 13.00g
[root@centos6 ~]# pvremove /dev/sdc2 --force
WARNING: PV /dev/sdc2 belongs to Volume Group vg0 (consider using vgreduce).
/dev/sdc2: physical volume label not removed.
(If you are certain you need pvremove, then confirm by using --force twice.)
[root@centos6 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdc2 vg0 lvm2 a--u 10.00g 10.00g
/dev/sdd vg0 lvm2 a--u 20.00g 20.00g
/dev/sde1 vg0 lvm2 a--u 13.00g 13.00g
[root@centos6 ~]# pvremove /dev/sdc2 --force
WARNING: PV /dev/sdc2 belongs to Volume Group vg0 (consider using vgreduce).
/dev/sdc2: physical volume label not removed.
(If you are certain you need pvremove, then confirm by using --force twice.)
[root@centos6 ~]# lvs
[root@centos6 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdc2 vg0 lvm2 a--u 10.00g 10.00g
/dev/sdd vg0 lvm2 a--u 20.00g 20.00g
/dev/sde1 vg0 lvm2 a--u 13.00g 13.00g
[root@centos6 ~]# vgremove vg0
Volume group "vg0" successfully removed
[root@centos6 ~]# vgs
[root@centos6 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdc2 lvm2 ---- 10.00g 10.00g
/dev/sdd lvm2 ---- 20.00g 20.00g
/dev/sde1 lvm2 ---- 13.01g 13.01g
[root@centos6 ~]# pvremove /dev/sdc2
Labels on physical volume "/dev/sdc2" successfully wiped
[root@centos6 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdd lvm2 ---- 20.00g 20.00g
/dev/sde1 lvm2 ---- 13.01g 13.01g
[root@centos6 ~]# pvremove /dev/sdd
Labels on physical volume "/dev/sdd" successfully wiped
[root@centos6 ~]# pvremove /dev/sde1
Labels on physical volume "/dev/sde1" successfully wiped
[root@centos6 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTsr0 11:0 1 3.7G 0 romsda 8:0 0 120G 0 disk├─sda1 8:1 0 200M 0 part /boot
├─sda2 8:2 0 80G 0 part /├─sda3 8:3 0 20G 0 part /testdir
├─sda4 8:4 0 1K 0 part├─sda5 8:5 0 4G 0 part [SWAP]└─sda6 8:6 0 2G 0 partsdb 8:16 0 120G 0 disk└─sdb1 8:17 0 2G 0 part [SWAP]sdc 8:32 0 20G 0 disk├─sdc2 8:34 0 10G 0 part└─sdc1 8:33 0 2G 0 part /mnt/test
sdd 8:48 0 20G 0 disksde 8:64 0 20G 0 disk└─sde1 8:65 0 13G 0 partsdf 8:80 0 20G 0 disk[root@centos6 ~]#
################演示成功################# |
本文转自chengong1013 51CTO博客，原文链接：http://blog.51cto.com/purify/1844274，如需转载请自行联系原作者