我觉得你可以得到的柯达完美页面SDK 从供应商的一面。
的PInvoke由供应商提供的通话

检查开发者工具部分中的链接
的 http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path = 2714&放大器; PQ-区域= EN_US&安培; _requestid = 3863

I have a KODAK i2600 scanner connected to a network over SX Virtual Link, which on every pc in this network emulates a usb connection to the scanner. I can find the emulated usbs pid and vid easily like this:

or this:

I tried to detect the signals with LibUsbDotNet, but with their example it just doesn't work. I tried with this example:

public static UsbDevice MyUsbDevice;

#region SET YOUR USB Vendor and Product ID!

public static UsbDeviceFinder MyUsbFinder = new UsbDeviceFinder(int.Parse("040a", System.Globalization.NumberStyles.HexNumber), int.Parse("601d", System.Globalization.NumberStyles.HexNumber));


#endregion

public static void Main(string[] args)
{
    ErrorCode ec = ErrorCode.None;

    try
    {
        // Find and open the usb device.
        MyUsbDevice = UsbDevice.OpenUsbDevice(MyUsbFinder);

        // If the device is open and ready
        if (MyUsbDevice == null) throw new Exception("Device Not Found.");

        // If this is a "whole" usb device (libusb-win32, linux libusb-1.0)
        // it exposes an IUsbDevice interface. If not (WinUSB) the 
        // 'wholeUsbDevice' variable will be null indicating this is 
        // an interface of a device; it does not require or support 
        // configuration and interface selection.
        IUsbDevice wholeUsbDevice = MyUsbDevice as IUsbDevice;
        if (!ReferenceEquals(wholeUsbDevice, null))
        {
            // This is a "whole" USB device. Before it can be used, 
            // the desired configuration and interface must be selected.

            // Select config #1
            wholeUsbDevice.SetConfiguration(1);

            // Claim interface #0.
            wholeUsbDevice.ClaimInterface(0);
        }

        // open read endpoint 1.
        UsbEndpointReader reader = MyUsbDevice.OpenEndpointReader(ReadEndpointID.Ep01);


        byte[] readBuffer = new byte[1024];
        while (ec == ErrorCode.None)
        {
            int bytesRead;

            // If the device hasn't sent data in the last 5 seconds,
            // a timeout error (ec = IoTimedOut) will occur. 
            ec = reader.Read(readBuffer, 5000, out bytesRead);

            if (bytesRead == 0) throw new Exception(string.Format("{0}:No more bytes!", ec));
            Console.WriteLine("{0} bytes read", bytesRead);

            // Write that output to the console.
            Console.Write(Encoding.Default.GetString(readBuffer, 0, bytesRead));
        }

        Console.WriteLine("\r\nDone!\r\n");
    }
    catch (Exception ex)
    {
        Console.WriteLine();
        Console.WriteLine((ec != ErrorCode.None ? ec + ":" : String.Empty) + ex.Message);
    }
    finally
    {
        if (MyUsbDevice != null)
        {
            if (MyUsbDevice.IsOpen)
            {
                // If this is a "whole" usb device (libusb-win32, linux libusb-1.0)
                // it exposes an IUsbDevice interface. If not (WinUSB) the 
                // 'wholeUsbDevice' variable will be null indicating this is 
                // an interface of a device; it does not require or support 
                // configuration and interface selection.
                IUsbDevice wholeUsbDevice = MyUsbDevice as IUsbDevice;
                if (!ReferenceEquals(wholeUsbDevice, null))
                {
                    // Release interface #0.
                    wholeUsbDevice.ReleaseInterface(0);
                }

                MyUsbDevice.Close();
            }
            MyUsbDevice = null;

            // Free usb resources
            UsbDevice.Exit();

        }

        // Wait for user input..
        Console.ReadKey();
    }
}

In this example when i try to open usb device the result is null. So i tried to to detect any signal from any usb device with this example:

public static IDeviceNotifier UsbDeviceNotifier = DeviceNotifier.OpenDeviceNotifier();

    private static void Main(string[] args)
    {
        // Hook the device notifier event
        UsbDeviceNotifier.OnDeviceNotify += OnDeviceNotifyEvent;

        // Exit on and key pressed.
        Console.Clear();            
        Console.WriteLine();
        Console.WriteLine("Waiting for system level device events..");
        Console.Write("[Press any key to exit]");

        while (!Console.KeyAvailable)
            Application.DoEvents();

        UsbDeviceNotifier.Enabled = false;  // Disable the device notifier

        // Unhook the device notifier event
        UsbDeviceNotifier.OnDeviceNotify -= OnDeviceNotifyEvent;
    }

    private static void OnDeviceNotifyEvent(object sender, DeviceNotifyEventArgs e)
    {
        // A Device system-level event has occured

        Console.SetCursorPosition(0,Console.CursorTop);

        Console.WriteLine(e.ToString()); // Dump the event info to output.

        Console.WriteLine();
        Console.Write("[Press any key to exit]");
    }`

With this example i can only detect connect and disconnect signals. So i tried to connect to a usb keyboard/mouse port with LibUsbDotNet, and that too didn't work.

It seems that i severely don't understand what needs to be done here.

Next, i tried to even check if a certain usb device is connected at all with this example from SO: USB Device Connected And even this didn't work.

To sum things up, i need to do this:

1. Connect to the usb port where the scanner is connected(and listen to the signals that it sends over that port).
2. Detect a signal from a scan button:
3. When a signal from 2. is detected i send a signal to the scanner to scan with a TWAIN or ISIS lib with my own configurations.

I think you can get kodak perfect page SDK from the vendor side. Pinvoke the calls provided by the vendor.

Check developer tools section in the link http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=2714&pq-locale=en_US&_requestid=3863