我想我找到了Xcode方法来将现有项目推送到GitHub或任何其他远程存储库！

先决条件

• 我假设您有一个由Xcode 4创建的项目
  
• 您创建了一个空的远程git存储库（在下面的示例中，我将其称为 RemoteRepository ） li>
  

推送至远程

1. 打开Xcode中的 Organizer ，转到 Repositories 标签。

首先点击远程然后在添加远程

输入远程存储库的远程名称​​和位置 on create

然后选择您的项目并打开文件 - >来源控制 - > Push ...

选择远程存储库并等待它连接！查找括号中的 Create 。

现在您的旧项目已发布到GitHub上 img src =https://i.stack.imgur.com/kIQpN.pngalt =GitHub上的结果>

我希望它也适用于你！在我的情况下，它适用于每个远程git存储库。

请与我联系 twitter 如果有什么不清楚的地方或者用英文写得不好！

The Git integration in XCode 4 is very welcome however it seems to be a bit flaky when it comes to dealing with remote repositories. For clarity I'm using OS X version 10.6.7 and XCode 4.0.2 (4A2002a).

If I create a new XCode 4 Project and accept the option to create a local Git repository, all is well. I can commit locally and that's great.

When I want to push the new project to GitHub I want to add a remote repository and push my local changes up to GitHub. I can add a GitHub repository to XCode 4 as a new Repository in the Organizer window but there's no method of setting it as a remote repository for my existing project.

So I switch to using git commands in Terminal.

git remote add origin https://<username>@github.com/<organization>/<repository>.git

If I then go back to XCode 4 and try to use

File -> Source Control -> Push...

then the Choose the repository to which to push changes. dialog appears listing the origin remote repository. There's a yellow indicator saying that Authentication is required, which is fine as I've not been able to enter my credentials yet for HTTPS. However when I click 'Push' and it tries to push the changes it says "The operation could not be performed because access to the repository 'origin' is denied."

A dialog prompting me for my username and password then appears with my pre-filled out so it must be reading this correctly from the local repository's config.

When I enter my password XCode 4 then crashes with the following error

ASSERTION FAILURE in /SourceCache/IDEKit/IDEKit-303/Framework/Classes/SourceControl/IDESourceControlOperationInfo.m:59
Details:  Message sent to invalidated object: <IDESourceControlPushOperationInfo, 0x200bd2a80>. Backtrace for invalidation:
 (null)
Object:   <IDESourceControlPushOperationInfo: 0x200bd2a80>
Method:   -invalidate
Thread:   <NSThread: 0x200020700>{name = (null), num = 1}
Hints:   None

If I restart XCode an origin repository has been added to the Repositories browser in Organizer and I can see the master branch on GitHub so I know the credentials are right without me changing anything.

Has anyone found a reliable way of using XCode 4 with GitHub starting with a local project first?

If I clone an existing GitHub repository with an XCode project in it, open it with XCode 4 then even though the first Push seems to fail, the 2nd push did then work. So maybe starting from absolute scratch with XCode 4 creating the repository for me isn't the best pattern (until they improve the Git tooling in a later version of XCode 4).

EDIT WITH FURTHER DETAILS OF ONE WORKAROUND

This example only really applies to the first project you're adding to a GitHub repository. As such I think you're better off with the following steps, bearing in mind there still seem to be some XCode 'gotchas' in this solution.

1. List item
2. 'Connect to a repository' from Welcome to XCode dialog.
3. Use GitHub SSH URL for Location
4. Give it a name (RepositoryName)and Clone to a directory
5. 1st attempt appears to fail even though contents are downloaded
6. Try Again and it works.
7. There is now a new Repository defined in the Organizer window with its origin set to the GitHub remote SSH URL.
8. Create a New Project within the directory you just cloned into but DO NOT tick the 'Create local git repository for this project' option.
9. Do initial commit to local Git repository.
10. Try Source Control -> Push and XCode 4 fails with 'The operation could not be performed because access to the repository RepositoryName was denied. Check username and password'
11. Try Source Control -> Push and XCode 4 pops up the remote Repository dialog again but this time has detected a remote Repository called origin. Next to it there's a yellow ball and 'Authentication required'.
12. Clicking 'Push' again caused the remote Push to work.

One thing I've spotted and not managed to work out yet is that the response messages back from GitHub with the checkin hash value and any messages seem to get reported in XCode Log navigator as Push failures, even though the Push is successful as far as GitHub is concerned.

Anyone else have a better solution?

I think I found the Xcode way to push a existing project to GitHub or any other remote repository!

Preconditions

• I assume that you have a project created by Xcode 4 with a local git repository.
• You created an empty remote git repository (I call it RemoteRepository in in the following example)

Push it to remote

1. Open the Organizer in Xcode an go to the Repositories tab

2. At first click on Remotes and then on "Add Remote"

3. Enter a Remote Name and the Location of your remote repository and click on create

4. Then select your project and open File -> Source Control -> Push ...

5. Select your remote repository and wait until it is connectable! Look for the Create in the brackets.

6. Now your old project is published to GitHub

I hope it will works for you also! In my case it works with every remote git repository.

Please contact me on twitter if something unclear or wrote in bad English!